Bauknecht Dryer Quick Reference Manual

Summary of Dryer

  • Page 1

    9 ! ! " # $ % & '& " ()%.

  • Page 2

    10 ! " 1. Removing the packaging and check • after unpacking, make sure that the dryer is undamaged. If in doubt, do not use the dryer. Contact after-sales service or your local retailer. • keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are pot...

  • Page 3

    11 # 1) for great britain only warning - this appliance must be earthed fuse replacement if the mains lead of this appliance is fitted with a bs 1363a 13amp fused plug, to change a fuse in this type of plug use an a.S.T.A. Approved fuse to bs 1362 type and proceed as follows: 1. Remove the fuse cove...

  • Page 4

    12 1. Packing the packing box may be fully recycled as confirmed by the recycling symbol. 2. Energy saving tips • always dry a full load: depending on the type of laundry and the programme/ drying time. • by preference use the maximum spin speed allowed by your washing machine, since draining the wa...

  • Page 5

    13 a. Work top b. Contact pin c. Door to open the door: pull the handle. To close the door: push gently until closed. D. Filter reminder - maintenance and cleaning filter clean the lint filter at the end of every drying cycle: open the door. Pull the filter upwards. Remove lint using a soft brush or...

  • Page 6

    14 $ in some dryer models the vent hose together with an adaptor is supplied in the drum. If the hose and adaptor are not supplied as a standard the optional accessory amh 577 kit, available at your dealer, can be used. Installing the vent hose a. Place a towel or the packing material on the right-h...

  • Page 7

    15 % & door reversibility a. Unplug the dryer. B. Open the door. C. Using a spanner, turn the contact pin on the inside of the door (top) through 90° and remove it. D. Remove the 2 door hinge screws, followed by the door. E. Unscrew the 2 screws above and below the door lock system. F. Removing the ...

  • Page 8

    16 '& " ()% troubleshooting guide if a fault occurs, before contacting our after-sales service, make the following checks to try and remedy the problem: drying takes too long / laundry is not dry enough: • was the correct programme selected? • was the inserted laundry too wet (washing machine spin s...